At Carolina Eastern Crop Excellence®, we believe that adjuvants and nutritionals are value added and can be the simple solution to many on the farm problems. Our goal is for your farm to thrive, to help you mediate risk, make spray applications easier, more effective and see an attractive rate of return on your investment.
PRODUCT NAME
CLEAR EXCELLENCE™
DESCRIPTION
Liquid Tank Cleaner, Commercial Detergent
PRINCIPAL FUNCTIONING AGENTS
Proprietary Blend of surfactants, dispersants and emulsifiers
CROPS
FEATURES & BENEFITS
APPLICATION RATES
Large Volume Tanks: Close boom valve and add 100 gallons of water in the tank. Turn on agitation and add one quart of CLEAR EXCELLENCE. One gallon of CLEAR EXCELLENCE will treat up to 400 gallons of water.
Small Volume Tanks: Fill tank half-full with water and use one ounce or more for each 3 gallons of the tank volume. Agitate thoroughly. Drain and follow with clean water rinse. Always discard rinse water according to pesticide label directions.
PACKAGING:
1 Gallon Containers
DOCUMENTS
Quick Reference Guide
Product Label
PRODUCT NAME
MIXMASTER®
DESCRIPTION
Acidifier / Compatibility Agent / Cotton Spindle Cleaner
PRINCIPAL FUNCTIONING AGENTS
Alcohol ethoxylate phosphate ester: 55%
Constituents ineffective as a spray adjuvant: 45%
Total: 100%
CROPS
FEATURES & BENEFITS
MixMaster® is a 55% active alcohol ethoxylate phosphate ester, designed for use as an anionic compatibility agent that aids in the mixing of liquid fertilizers with pesticide tank solutions. When used as a compatibility agent in liquid fertilizer-pesticide spray mixtures, MixMaster® improves the dispersion and uniformity of tank mix ingredients. MixMaster® may be used with pesticides registered for use on all agricultural, forestry, industrial, non-cropland, rights-of-way, turf and municipal, and other uses.
It is recommended to add MixMaster® to the fertilizer with the agitation on before adding the pesticide. Use 1 to 2 pints of MixMaster® per 100 gallons of liquid nitrogen/pesticide tank mixture. Apply immediately after mixing. If allowed to stand for extended period of time, ensure that tank mix is agitated again before using.
DIRECTIONS FOR USE
Use MixMaster® at the rate of 1-2 pints per 100 gallons of liquid nitrogen/pesticide tank mixture. Prior to pesticide applications, clean mixing and application equipment according to the pesticide label directions. It is recommended to add MixMaster® to the fertilizer with agitation on before adding the pesticide. Apply immediately after mixing. If allowed to stand for an extended period of time, ensure that the tank mix is agitated again before using.
PACKAGING:
1 Gallon Containers
DOCUMENTS
Quick Reference Guide
Tech Sheet
Product Label
SDS
PRODUCT NAME
ON-POINT™
DESCRIPTION
Drift Retardent (DRA)
PRINCIPAL FUNCTIONING AGENTS
Polyvinyl Polymer (Polyacrylamide): 1%
Constituents Ineffective as Spray Adjuvant: 99%
Total 100%
CROPS
FEATURES & BENEFITS
ON-POINT is an effective, easy-to-use adjuvant for deposition and drift retardation in spraying operations. ON-POINT is compatible with most water soluble and wettable powder pesticides, desiccants & cotton defoliants when applied by aerial application or standard ground equipment.
DIRECTIONS FOR USE
Step 1: Select correct dosage from the chart below.
Step 2: Fill mix tank with water and pesticide. Begin agitation.
Step 3: Add ON-POINT
Step 4: If additional surfactant of other spray adjuvants are used, they should be added after ON-POINT.
Step 5: Continue agitation for at least 2-minutes prior to spray application.
MIXING INSTRUCTIONS
ON-POINT DOSAGE CHART
| SPRAY PRESSURE | NOZZLE ORIENTATION | ON-POINT per 100 gallons of spray solution |
| AERIAL APPLIED (below 45 psi) | Straight Back | 2 – 4 quarts |
| AERIAL APPLIED (below 45 psi) | 45 degree angle back | 3 – 5 quarts |
| GROUND APPLIED LOW (below 30 psi) | Flat Fan, Flood | 1 – 3 quarts |
| GROUND APPLIED LOW (below 30 psi) | Off-Center | 2 – 3 quarts |
| GROUND APPLIED MEDIUM (30 – 50 psi) | Flat Fan, Flood | 2 – 3 quarts |
| GROUND APPLIED MEDIUM (30 – 50 psi) | Off-Center | 3 – 4 quarts |
| GROUND APPLIED MEDIUM (30 – 50 psi) | Spray Guns | 3 – 5 quarts |
| GROUND APPLIED HIGH (50 – 150 psi) | Spray Guns | 3 – 10 quarts |
PACKAGING:
1 Gallon Containers
DOCUMENTS
Quick Reference Guide
Tech Sheet
Product Label
SDS
PRODUCT NAME
SUDBLASTER® X-TREME®
DESCRIPTION
Liquid Silicone Defoamer
PRINCIPAL FUNCTIONING AGENTS
Dimethylpolysiloxane: 30%
CROPS
FEATURES & BENEFITS
SudBlaster X-TREME is an effective high grade silicone anti-foaming agent found to be very effective in reducing or eliminating foam in most agriculture spray equipment.
DIRECTIONS FOR USE
Shake well before using. For best foam control, add SudBlaster X-TREME to spray liquid before foam starts to appear. If foam has already started to build, add SudBlaster X-TREME directly to the foam. The use of 1 to 4 ounces of SudBlaster X-TREME per 100 gallons of spray mixture is generally sufficient to suppress or eliminate foam from most conventional spray tanks. Agitation will aid dispersion.
MIXING INSTRUCTIONS
PACKAGING:
1 Quart Containers
DOCUMENTS
Quick Reference Guide
Tech Sheet
Product Label
SDS
