Products

Grow with Crop Excellence!

At Carolina Eastern Crop Excellence®, we believe that adjuvants and nutritionals are value added and can be the simple solution to many on the farm problems.  Our goal is for your farm to thrive, to help you mediate risk, make spray applications easier, more effective and see an attractive rate of return on your investment.

Crop Excellence Products

Clear All
Categories
Sort By
Tags
Adjuvant Surfactants
Compare
WATERSPOUT® | Spray Adjuvant: Penetrant, Drift Control Agent, Deposition Aid & Spray Tank Buffer-image
PRODUCT NAME WATERSPOUT®
DESCRIPTION Spray Adjuvant: Penetrant, Drift Control Agent, Deposition Aid, and Spray Tank Buffer
PRINCIPAL FUNCTIONING AGENTS Methylacetic acid, alcohol ethoxylates and lecithin: 80% Inert Ingredients: 20% 
FEATURES & BENEFITS WATERSPOUT® is designed as a penetrant, drift control agent, deposition aid, and spray tank buffer all in one product. WATERSPOUT® may be used on a wide range of crops including fruits, vegetables, row crops, tree nut crops, citrus, small grains, forage crops, vine crops, as well as turf and ornamentals. WATERSPOUT® can safely enhance pesticide efficiency and on-target deposition while conditioning spray tank water pH.
DIRECTIONS FOR USE WATERSPOUT® may be used with any herbicide, insecticide, fungicide or other pest control product that allows or requires the use of a spray additive. This product may be used in accordance with the label instructions of pesticides that have been approved for aquatic use. The user must have experience with this product or have tested this product in the application and on all plants before use. To test the product, make the exact mixture desired and spray a small test area. Then wait at least 48 hours to see if damage occurs. GENERAL USE Herbicides, Defoliants, Desiccants: 1 to 4 pints per 100 gallons of spray mixture when used as a penetrant. 12 ounces to 2 pints per acre when used in place of crop oil concentrates. Insecticides, Fungicides and Fertilizers: ½ to 2 pints per 100 gallons (¼ to 1½ fl. oz. per 5 gallons) of spray solution. Aquatics: 1 to 4 pints per 100 gallons (1 to 3 fl. oz. per 5 gallons) Drift Reduction & Deposition Aid: All uses 1 to 2 quarts per 100 gallons of spray solution. Acidifier-Buffer: Highly alkaline water (pH 8 or higher): 8 to 16 fl. oz. per 100 gallons (1 to 2 tablespoons per 5 gallons) spray solution. Mildly alkaline water (pH 6.5 to 8): 4 to 8 fl. oz. per 100 gallons (½ to 1 tablespoon per 5 gallons) sprays solution. Turf, Ornamental and Industrial: 1 to 4 pints per 100 gallons (1 to 3 fl. oz. per 5 gallons) of spray solution. NOTE: Before treating a large area, treat small area and observe prior to full scale application.
PACKAGING: 2.5 Gallon Cases & 275 Gallon Totes & Bulk
DOCUMENTS Product Label  
Compare
CE Sticker X-TREME® | Spreader - Sticker - Deposition Aid-image
PRODUCT NAME CROP EXCELLENCE® STICKER X-TREME®
DESCRIPTION Spreader - Sticker - Deposition Aid
PRINCIPAL FUNCTIONING AGENTS Latex + Silicone: 63% Inert Ingredients: 37% 
FEATURES & BENEFITS CROP EXCELLENCE® STICKER X-TREME®  is a premium non-ionic spreader/sticker foliar surfactant specifically formulated to improve contact chemistries and tank mix products that require excellent coverage and rain fast duration. CE STICKER X-TREME® is an extremely safe surfactant, that provides excellent coverage and resist loss due to environmental impact. CE STICKER X-TREME® is for use in turf, ornamental, agriculture, right away, industry and aquatic settings. Apply CE STICKER X-TREME® when superior coverage and performance is demanded. CE STICKER X-TREME® merges the binding of latex and the spreading of organosilicone to build a premium spreader sticker. CE STICKER X-TREME®  increase deposition, run off and securing rain fastness. CE STICKER X-TREME® produces a consistent film, protecting pesticides from the loss due to environmental fate. Apply 30 minutes prior to irrigating or potential rain.
DIRECTIONS FOR USE SHAKE WELL BEFORE USING. ALWAYS FOLLOW THE DIRECTIONS ON THE LABEL OF ANY PEST CONTROL PRODUCT. CE STICKER X-TREME®: may be used with any herbicide, insecticide, fungicide or other pest control product that allows or requires the use of a spray additive. This product may be used in accordance with the label instructions of pesticides that have been approved for aquatic use. The user must have experience with this product or have tested this product in the application and on all plants before use. To test the product, make the exact mixture desired and spray a small test area. Then wait at least 48 hours to see if damage occurs.
PACKAGING: 2.5 Gallon Cases & 275 Gallon Totes & Bulk
DOCUMENTS Product Label  
Compare
RAPIDS® | Biological Food Source-image
PRODUCT NAME RAPIDS®
DESCRIPTION A proprietary composition of surfactants, natural acids, beneficial microorganisms
PRINCIPAL FUNCTIONING AGENTS Potash (K2O)………………………………3.0% Derived From: potassium acetate Mixture of microbial strains……4.55% Pseudomonas taiwanensis……….7×108 CFU/ml Yarrowia lipolytica………………………4×107 CFU/ml Bacillus amyloliquefaciens……….4×107 CFU/ml
FEATURES & BENEFITS RAPIDS® is a spray and fertilizer additive designed to enhance nutrient availability and uptake. RAPIDS® is intended to be used in conjunction with a regular fertilizer program and standard recommended agricultural practices.
DIRECTIONS FOR USE Apply 16 ounces per acre per application on most crops or through fertigation systems or transplant solutions. See dealer for specific recommendations for each crop. SHAKE WELL BEFORE USE.
PACKAGING: Available in 2.5 Gallon Containers & 275 Gallon Totes
DOCUMENTS Tech Sheet Product Label
Compare
SINGE™ | Modified Vegetable Seed Oil & Surfactant-image

PRODUCT NAME

SINGE™


DESCRIPTION

Modified Vegetable Seed Oil & Surfactant


PRINCIPAL FUNCTIONING AGENTS

Phenol Ethoxylate: 97%


FEATURES & BENEFITS

SINGE™ is a multifunctional spray adjuvant developed as a penetrating surfactant concentrate with superior wetting and penetrating characteristics.


DIRECTIONS FOR USE

Use SINGE at a rate of 1 – 2 pints per acre as a replacement for non-ionic surfactants and crop oil concentrates. The addition of a liquid fertilizer (28-32% nitrogen solution) may also be required to improve control under extreme environmental conditions. Always add SINGE™ last to the spray mixture and provide good agitation. 


PACKAGING:

Available in 2.5 Gallon Containers & 275 Gallon Totes


DOCUMENTS

Product Label

 

Compare
TRADEMARK® | Non-Ionic Surfactant-image

PRODUCT NAME

TRADEMARK®


DESCRIPTION

Non-Ionic Surfactant


PRINCIPAL FUNCTIONING AGENTS

Surfactants, humectants, and free fatty acids… 90%

Constituents ineffective as a Spray Adjuvant… 10%


FEATURES & BENEFITS

TRADEMARK® is a premium grade, low foam non-ionic spray adjuvant for use on plants to maximize the effectiveness of insecticides, herbicides, fungicides and defoliants. It is designed for outstanding solubilization in cold water, quick wetting, uniform droplet distribution and increased spray retention on leaf and stem surfaces. TRADEMARK® Incorporates superior wetting and penetrating characteristics that allow for more uniform spray coverage without excessive runoff of the spray. 


DIRECTIONS FOR USE

With insecticides, fungicides, defoliants and desiccants: Add 4 pints per 100 gallons of spray solution during mixing. For specific rates of surfactant, always refer to the pesticide manufacturers’ label. NOTE: Needed rates of TRADEMARK® may vary with conditions of application. Sufficient TRADEMARK® should be added to form a smooth, uniform spray deposit. Recommended Rate: 1 – 4 pints per acre


PACKAGING:

Available in 2.5 Gallon Containers


DOCUMENTS

Tech Sheet

Product Label

 

Compare
Register® X-TREME®| Highly Refined Crop Oil Concentrate-image

PRODUCT NAME

Register® X-TREME®


DESCRIPTION

Highly Refined Crop Oil Concentrate


PRINCIPAL FUNCTIONING AGENTS 

Paraffin Base Petroleum Oil: 60%

Surfactant Blend: 40%


FEATURES & BENEFITS

REGISTER® X-TREME® is a highly concentrated non-ionic blend of highly refined paraffinic crop oil and surfactants designed to optimize the performance of certain herbicides in post emergence applications. This combination utilizes the penetrating, non-evaporating properties of a paraffinic crop oil and the wetting and dispersing characteristics of a surfactant blend at a lower use rate. The lower rate means less material to add, inventory, and ship to perform the same job. When used as directed, REGISTER® X-TREME® increases the activity of herbicides by aiding in the deposition, absorption and retention of active ingredients on leaf and stem surfaces.


DIRECTIONS FOR USE

Refer to PESTICIDE label for specific crop use and application rates.  Generally, use 4 pints in 100 gallons of water.


PACKAGING:

2.5 Gallon Containers


DOCUMENTS

Product Label

Compare
X-CELERANT® | AMS Replacement, Defoamer, Drift Retardent & Water Conditioner-image

PRODUCT NAME

X-CELERANT®


DESCRIPTION

AMS Replacement, Defoamer, Drift Retardent, Water Conditioner


PRINCIPAL FUNCTIONING AGENTS 

Alkylpolyglycosides, Defoamers and Nonionic Coupling Agents: 20% 

Blend of Ammonium Salts: 25.5% 


FEATURES & BENEFITS

X-CELERANT® will enhance the herbicide activity of certain post emergence herbicides when used at the proper rate. When used at recommended rates, X-CELERANT® can increase the performance of those herbicides recommended for use with ammonium-based nitrogen. X-CELERANT® Advantages: Consists of surfactants, defoamer, drift control agent and ammonium salts. 


DIRECTIONS FOR USE

Recommended Rates: 1 – 2 quarts per 100 gallons water.  


PACKAGING: 

2.5 Gallon Containers & 275 Gallon Totes


DOCUMENTS

Product Label

SDS

Compare
SWIFTKICK® | Fungicide / Insecticide Activator Adjuvant-image

PRODUCT NAME

SWIFTKICK®


DESCRIPTION

Fungicide / Insecticide Activator Adjuvant


PRINCIPAL FUNCTIONING AGENTS 

Proprietary blend of polysorbate fatty acids and polyethoxy esters: 99.5% 

Dimethylpolysiloxane: 0.5% 


FEATURES & BENEFITS

SWIFTKICK® is a unique multi-purpose activator adjuvant that will enhance chemical activity with premium ingredients and proven performance. SWIFTKICK® is highly compatible and can be applied to all crops. SWIFTKICK® Advantages: Increases fungicide and insecticide performance, Accelerates droplet retention and coverage, Improves penetration and translocation, Maximizes the return on investment, Performance on a wide range of diseases and systemic fungicides, 99.5% proprietary blend of active ingredients 


DIRECTIONS FOR USE

Ground application: 1 pt of SwiftKick per 100 gals of spray solution 

Aerial application: 1 qt of SwiftKick per 100 gals of spray solution 


PACKAGING: 

1 Gallon Containers


DOCUMENTS

Tech Sheet

Product Label

 

Compare
STRONGHOLD ® | Deposition Aid-image

PRODUCT NAME

STRONGHOLD ®


DESCRIPTION

Deposition Aid


PRINCIPAL FUNCTIONING AGENTS 

Proprietary blend of ethoxylates, fatty acids and parafins: 99% 


CROPS


FEATURES & BENEFITS

STRONGHOLD® is a proprietary adjuvant blend, designed to be used with pre-plant and pre-emergent herbicides to enhance coverage, deposition and improve absorption of spray mixture on the soil reducing the potential for leaching. Soil type will affect the degree of soil penetration. STRONGHOLD® may be used with herbicides and/or fertilizer mixtures. Benefits: Improves absorption, Improves pre-emergent weed control, Reduces evaporation, Superior drift control, Enhances efficiency, Reduces offsite movement (such as herbicide splash-up) 


DIRECTIONS FOR USE

Ground application: 

Use 1 – 4 pints of STRONGHOLD per acre in 5 – 30 gallons of spray.  

Aerial application: 

Use 6 – 16 ounces of STRONGHOLD per acre.  A minimum of 1.0% by volume is recommended for aerial and low volume spray applications.  


PACKAGING: 

2.5 Gallon Containers


DOCUMENTS

Tech Sheet

Product Label

SDS

 

Compare
NU-SURF X-TREME® | High Availability - Low Use - Low Rate Non-Ionic Surfactant-image

PRODUCT NAME

NU-SURF X-TREME®


DESCRIPTION

Nonionic Surfactant


PRINCIPAL FUNCTIONING AGENTS 

Surfactants, humectants, and free fatty acids: 90% 

Constituents Ineffective as a Spray Adjuvant: 10% 


CROPS


FEATURES & BENEFITS

NU-SURF X-TREME is a premium grade, low foam non-ionic spray adjuvant for use on plants to maximize the effectiveness of insecticides, herbicides, fungicides and defoliants. It is designed for outstanding solublization in cold water, quick wetting, uniform droplet distribution and increased spray retention on leaf and stem surfaces. NU-SURF X-TREME incorporates superior wetting and penetrating characteristics that allow for more uniform spray coverage without excessive runoff of the spray. 


DIRECTIONS FOR USE

Applications Nu-Surf X-TREME Per 100 Gallons Mix
Insecticides 3 to 8 ounces
Fungicides 3 to 8 ounces
Herbicides 1 to 4 pints
Acaricides 3 to 8 ounces 
Defoliants 1 to 2 pints
Desiccants 1 to 2 pints
Wettable Powders 1 to 2 pints

 


PACKAGING: 

2.5 Gallon Containers


DOCUMENTS

Tech Sheet

Product Label

 

Compare
KINGTIDE® | Non-Ionic Wetter / Spreader / Penetrant-image

PRODUCT NAME

KINGTIDE®


DESCRIPTION

NON-IONIC WETTER / SPREADER / PENETRANT


PRINCIPAL FUNCTIONING AGENTS 

Methyl soyate, Methylated silicones, and Polyethylene glycol mono (branched pnonylphenyl) ether: 100% 


FEATURES & BENEFITS

KINGTIDE® is a multifunctional spray adjuvant formulated to promote fast spreading, uniform distribution and absorption of pesticide mixtures on leaf and stem surfaces. KINGTIDE® is labeled for use with pesticides in agricultural cropping systems, aquatic, industrial, right-of-ways, non-cropland, forestry, and turf applications. Use KINGTIDE® wherever a label calls for an MSO or MVO and allows or does not exclude the use of an organosilicone. 


DIRECTIONS FOR USE

Herbicides: Use KINGTIDE® at ½ to 2 pints per acre in 10 to 20 gallons of spray solution for ground applications or ½ to 2 pints per acre in 5 to 10 gallons of spray solution for aerial applications.

Insecticides / Fungicides / Defoliants: Use KINGTIDE® at 4 to 16 fluid ounces per acre in 5 to 10 gallons of spray solution for ground applications or 4 to 6 fluid ounces per acre in 2 to 5 gallons of spray solution for aerial applications. 


PACKAGING: 

2.5 Gallon Containers


DOCUMENTS

Tech Sheet

Product Label

 

Compare
FUZE™ | Non-Ionic Wetter / Sticker / Penetrant-image

PRODUCT NAME

FUZE™


DESCRIPTION

Non-Ionic Wetter / Sticker / Penetrant / Rain Fastening Agent


PRINCIPAL FUNCTIONING AGENTS 

Alkylphenol ethoxylate, polyether-modified polysiloxane, and glycol blend: 100% 


FEATURES & BENEFITS

FUZE™ is a superior organosilicone surfactant developed for water-based herbicide applications in agriculture, horticulture industrial, turf and forestry operations. It is designed for quick spreading and wetting, uniform droplet distribution and absorption on leaf and stem surfaces. FUZE™ may be used with most pesticides and fertilizer products. FUZE™ is also recommended for use with non-selective herbicides and other pesticides including those used to desiccate or defoliate. 


DIRECTIONS FOR USE

FUZE™ is an organosilicone surfactant designed for use in those agricultural applications, where a nonionic surfactant is recommended. Rate: 1 – 4 pints per 100 gallons. 


PACKAGING:

1 Gallon Containers


DOCUMENTS

Tech Sheet

Product Label

 

Compare
CROPSMART X-TREME® | High Availability - Low Use - Low Rate - Refined Crop Oil Concentrate-image

PRODUCT NAME

CROPSMART X-TREME®


DESCRIPTION

High Refined Crop Oil Concentrate


PRINCIPAL FUNCTIONING AGENTS 

Paraffin Base Petroleum Oil: 60%

Surfactant Blend: 40% 


CROPS


FEATURES & BENEFITS

CROPSMART X-TREME® is a highly concentrated non-ionic blend of highly refined paraffinic crop oil and surfactants designed to optimize the performance of certain herbicides in post emergence applications. This combination utilizes the penetrating, non-evaporating properties of a paraffinic crop oil and the wetting and dispersing characteristics of a surfactant blend at a lower use rate. The lower rate means less material to add, inventory, and ship to perform the same job. When used as directed, CROPSMART X-TREME® increases the activity of herbicides by aiding in the deposition, absorption and retention of active ingredients on leaf and stem surfaces. Therefore, care must be taken in treating crops during periods when plants are subjected to drought stress, high temperatures and high humidity. 


DIRECTIONS FOR USE

REFER TO PESTICIDE LABEL FOR SPECIFIC CROP USE AND APPLICATION RATES. Generally, use 4 pints in 100 gallons of water (0.5% V/V). Do not exceed 1.0% by volume of the spray solution. Always add CROP SMART X-TREME last to the spray mixture and provide good agitation. Prior to use, read and follow all directions on this label and on the label of the pesticide being used. The pesticide manufacturer’s label for specific usages and restrictions have precedence. 


PACKAGING: 

2.5 Gallon Containers


DOCUMENTS

Tech Sheet

Product Label

 

Compare
CONQUER™ | Modified Vegetable Oil and Surfactant-image

PRODUCT NAME

CONQUER™


DESCRIPTION

Modified Vegetable (Seed) Oil and Surfactant 


PRINCIPAL FUNCTIONING AGENTS 

Modified Vegetable (Seed) Oil and Alkyl Phenol Ethoxylate: 100% 


CROPS


FEATURES & BENEFITS

CONQUER is a multifunctional spray adjuvant developed as a penetrating surfactant concentrate with superior wetting and penetrating characteristics. CONQUER is designed as a replacement for non-ionic surfactants and crop oil concentrates in liquid spray mixtures. When used as directed, CONQUER maximizes the activity and effectiveness of certain herbicides in post emergence applications. Therefore, care must be taken in treating sensitive crops during periods when plants are subjected to drought stress, high temperatures, and high humidity. 


DIRECTIONS FOR USE

Use CONQUER at the rate of 1-2 pint/acre as a replacement for non-ionic surfactants and crop oil concentrates. The high end of the recommended use rate may be necessary during periods when plants are subjected to extreme stress or weed populations. The addition of a liquid fertilizer (28-32% nitrogen solution) may also be required to improve control under extreme environmental conditions. Always add CONQUER last to the spray mixture and provide good agitation. 


PACKAGING: 

2.5 Gallon Containers


DOCUMENTS

Quick Reference Guide

Tech Sheet

Product Label

SDS

Compare
CASTNET® | NON-AMS Water Conditioner, Surfactant & Drift Retardent-image

PRODUCT NAME

CASTNET®


DESCRIPTION

NON-AMS Water Conditioner, Surfactant & Drift Retardent 


PRINCIPAL FUNCTIONING AGENTS 

    1,2,3 – Propanetricarboxylic acid, 2-hydroxy-, trisodium salt, dehydrated, D-Glucopyranose, oligomeric, decyloctyl glycosides, and Monocarbamide dihydrogen sulfate: 34.75%

    Constituents ineffective as a Spray Adjuvant: 65.25%


FEATURES & BENEFITS

CASTNET is a water-conditioning agent/surfactant/drift reduction agent with defamer, that is formulated to enhance pesticidal performance.  CASTNET contains buffering and chelating agents which aid in maintaining the right pH in the tank mix solution and block hard water cations from interacting with the pesticide molecule.  CASTNET contains a non-ionic surfactant to improve retention and wetting of pesticides.  CASTNET contains no ammonium sulfate (AMS).  


DIRECTIONS FOR USE

    Add 1 – 4 quarts of CASTNET per 100 gallons of spray water (0.5 – 1%v/v) when used in place of ammonium sulfate.  

    For general use as a drift reduction agent, use 1 – 3 quarts of CASTNET per 100 gallons of spray water (0.25 – 0.75% v/v).  


PACKAGING:

Available in 2.5-gallon containers & 275 Gallon Totes


DOCUMENTS

Tech Sheet

Product Label

Adjuvant Surfactants
Compare
WATERSPOUT® | Spray Adjuvant: Penetrant, Drift Control Agent, Deposition Aid & Spray Tank Buffer-image
PRODUCT NAME WATERSPOUT® DESCRIPTION Spray Adjuvant: Penetrant, Drift Control Agent, Deposition Aid, and Spray Tank Buffer PRINCIPAL FUNCTIONING AGENTS Methylacetic acid, alcohol ethoxylates and lecithin: 80% Inert Ingredients: 20%  FEATURES & BENEFITS WATERSPOUT® is designed as a penetrant, drift control agent, deposition aid, and spray tank buffer all in one product. WATERSPOUT® may be used on a wide range of crops including fruits, vegetables, row crops, tree nut crops, citrus, small grains, forage crops, vine crops, as well as turf and ornamentals. WATERSPOUT® can safely enhance pesticide efficiency and on-target deposition while conditioning spray tank water pH. DIRECTIONS FOR USE WATERSPOUT® may be used with any herbicide, insecticide, fungicide or other pest control product that allows or requires the use of a spray additive. This product may be used in accordance with the label instructions of pesticides that have been approved for aquatic use. The user must have experience with this product or have tested this product in the application and on all plants before use. To test the product, make the exact mixture desired and spray a small test area. Then wait at least 48 hours to see if damage occurs. GENERAL USE Herbicides, Defoliants, Desiccants: 1 to 4 pints per 100 gallons of spray mixture when used as a penetrant. 12 ounces to 2 pints per acre when used in place of crop oil concentrates. Insecticides, Fungicides and Fertilizers: ½ to 2 pints per 100 gallons (¼ to 1½ fl. oz. per 5 gallons) of spray solution. Aquatics: 1 to 4 pints per 100 gallons (1 to 3 fl. oz. per 5 gallons) Drift Reduction & Deposition Aid: All uses 1 to 2 quarts per 100 gallons of spray solution. Acidifier-Buffer: Highly alkaline water (pH 8 or higher): 8 to 16 fl. oz. per 100 gallons (1 to 2 tablespoons per 5 gallons) spray solution. Mildly alkaline water (pH 6.5 to 8): 4 to 8 fl. oz. per 100 gallons (½ to 1 tablespoon per 5 gallons) sprays solution. Turf, Ornamental and Industrial: 1 to 4 pints per 100 gallons (1 to 3 fl. oz. per 5 gallons) of spray solution. NOTE: Before treating a large area, treat small area and observe prior to full scale application. PACKAGING: 2.5 Gallon Cases & 275 Gallon Totes & Bulk DOCUMENTS Product Label  
Compare
CE Sticker X-TREME® | Spreader - Sticker - Deposition Aid-image
PRODUCT NAME CROP EXCELLENCE® STICKER X-TREME® DESCRIPTION Spreader - Sticker - Deposition Aid PRINCIPAL FUNCTIONING AGENTS Latex + Silicone: 63% Inert Ingredients: 37%  FEATURES & BENEFITS CROP EXCELLENCE® STICKER X-TREME®  is a premium non-ionic spreader/sticker foliar surfactant specifically formulated to improve contact chemistries and tank mix products that require excellent coverage and rain fast duration. CE STICKER X-TREME® is an extremely safe surfactant, that provides excellent coverage and resist loss due to environmental impact. CE STICKER X-TREME® is for use in turf, ornamental, agriculture, right away, industry and aquatic settings. Apply CE STICKER X-TREME® when superior coverage and performance is demanded. CE STICKER X-TREME® merges the binding of latex and the spreading of organosilicone to build a premium spreader sticker. CE STICKER X-TREME®  increase deposition, run off and securing rain fastness. CE STICKER X-TREME® produces a consistent film, protecting pesticides from the loss due to environmental fate. Apply 30 minutes prior to irrigating or potential rain. DIRECTIONS FOR USE SHAKE WELL BEFORE USING. ALWAYS FOLLOW THE DIRECTIONS ON THE LABEL OF ANY PEST CONTROL PRODUCT. CE STICKER X-TREME®: may be used with any herbicide, insecticide, fungicide or other pest control product that allows or requires the use of a spray additive. This product may be used in accordance with the label instructions of pesticides that have been approved for aquatic use. The user must have experience with this product or have tested this product in the application and on all plants before use. To test the product, make the exact mixture desired and spray a small test area. Then wait at least 48 hours to see if damage occurs. PACKAGING: 2.5 Gallon Cases & 275 Gallon Totes & Bulk DOCUMENTS Product Label  
Features & Benefits:
Principal Functioning Agents:
Directions For Use:
Mixing Instructions:
Compare
RAPIDS® | Biological Food Source-image
PRODUCT NAME RAPIDS® DESCRIPTION A proprietary composition of surfactants, natural acids, beneficial microorganisms PRINCIPAL FUNCTIONING AGENTS Potash (K2O)………………………………3.0% Derived From: potassium acetate Mixture of microbial strains……4.55% Pseudomonas taiwanensis……….7×108 CFU/ml Yarrowia lipolytica………………………4×107 CFU/ml Bacillus amyloliquefaciens……….4×107 CFU/ml FEATURES & BENEFITS RAPIDS® is a spray and fertilizer additive designed to enhance nutrient availability and uptake. RAPIDS® is intended to be used in conjunction with a regular fertilizer program and standard recommended agricultural practices. DIRECTIONS FOR USE Apply 16 ounces per acre per application on most crops or through fertigation systems or transplant solutions. See dealer for specific recommendations for each crop. SHAKE WELL BEFORE USE. PACKAGING: Available in 2.5 Gallon Containers & 275 Gallon Totes DOCUMENTS Tech Sheet Product Label
Compare
SINGE™ | Modified Vegetable Seed Oil & Surfactant-image
PRODUCT NAME SINGE™ DESCRIPTION Modified Vegetable Seed Oil & Surfactant PRINCIPAL FUNCTIONING AGENTS Phenol Ethoxylate: 97% FEATURES & BENEFITS SINGE™ is a multifunctional spray adjuvant developed as a penetrating surfactant concentrate with superior wetting and penetrating characteristics. DIRECTIONS FOR USE Use SINGE at a rate of 1 – 2 pints per acre as a replacement for non-ionic surfactants and crop oil concentrates. The addition of a liquid fertilizer (28-32% nitrogen solution) may also be required to improve control under extreme environmental conditions. Always add SINGE™ last to the spray mixture and provide good agitation.  PACKAGING: Available in 2.5 Gallon Containers & 275 Gallon Totes DOCUMENTS Product Label  
Short Description: Modified Vegetable (Seed) Oil & Surfactant
Packaging: 2.5 Gallon Containers & 275 Gallon Totes
Features & Benefits: SINGE™ is a multifunctional spray adjuvant developed as a penetrating surfactant concentrate with superior wetting and penetrating characteristics.
Principal Functioning Agents: Phenol Ethoxylate: 97%
Directions For Use: Refer to pesticide label for specific crop use and application rates.
Compare
TRADEMARK® | Non-Ionic Surfactant-image
PRODUCT NAME TRADEMARK® DESCRIPTION Non-Ionic Surfactant PRINCIPAL FUNCTIONING AGENTS Surfactants, humectants, and free fatty acids… 90% Constituents ineffective as a Spray Adjuvant… 10% FEATURES & BENEFITS TRADEMARK® is a premium grade, low foam non-ionic spray adjuvant for use on plants to maximize the effectiveness of insecticides, herbicides, fungicides and defoliants. It is designed for outstanding solubilization in cold water, quick wetting, uniform droplet distribution and increased spray retention on leaf and stem surfaces. TRADEMARK® Incorporates superior wetting and penetrating characteristics that allow for more uniform spray coverage without excessive runoff of the spray.  DIRECTIONS FOR USE With insecticides, fungicides, defoliants and desiccants: Add 4 pints per 100 gallons of spray solution during mixing. For specific rates of surfactant, always refer to the pesticide manufacturers’ label. NOTE: Needed rates of TRADEMARK® may vary with conditions of application. Sufficient TRADEMARK® should be added to form a smooth, uniform spray deposit. Recommended Rate: 1 – 4 pints per acre PACKAGING: Available in 2.5 Gallon Containers DOCUMENTS Tech Sheet Product Label  
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/Trademark-TDS-2018-min.pdf
Short Description: Non-Ionic Surfactant
Packaging: 2.5 Gallon Containers
Features & Benefits: TRADEMARK® is a premium grade, low foam, non-ionic spray adjuvant for use on plants to maximize the effectiveness of insecticides, herbicides, fungicides, and defoliants.  It is designed for outstanding solubilization in cold water, quick wetting, uniform droplet distribution and increased spray retention on leaf and stem surfaces.  
Principal Functioning Agents: Surfactants, humectants, and free fatty acids... 90% Constituents ineffective as a Spray Adjuvant... 10%
Directions For Use: With insecticides, fungicides, defoliants and desiccants: Add 4 pints per 100 gallons of spray solution during mixing. For specific rates of surfactant, always refer to the pesticide manufacturers’ label. NOTE: Needed rates of TRADEMARK® may vary with conditions of application. Sufficient TRADEMARK® should be added to form a smooth, uniform spray deposit. Recommended Rate: 1 - 4 pints per acre
Compare
Register® X-TREME®| Highly Refined Crop Oil Concentrate-image
PRODUCT NAME Register® X-TREME® DESCRIPTION Highly Refined Crop Oil Concentrate PRINCIPAL FUNCTIONING AGENTS  Paraffin Base Petroleum Oil: 60% Surfactant Blend: 40% FEATURES & BENEFITS REGISTER® X-TREME® is a highly concentrated non-ionic blend of highly refined paraffinic crop oil and surfactants designed to optimize the performance of certain herbicides in post emergence applications. This combination utilizes the penetrating, non-evaporating properties of a paraffinic crop oil and the wetting and dispersing characteristics of a surfactant blend at a lower use rate. The lower rate means less material to add, inventory, and ship to perform the same job. When used as directed, REGISTER® X-TREME® increases the activity of herbicides by aiding in the deposition, absorption and retention of active ingredients on leaf and stem surfaces. DIRECTIONS FOR USE Refer to PESTICIDE label for specific crop use and application rates.  Generally, use 4 pints in 100 gallons of water. PACKAGING: 2.5 Gallon Containers DOCUMENTS Product Label
Packaging: 2.5 Gallon Containers
Features & Benefits: REGISTER® X-TREME® is a superior blend of highly refined paraffinic crop oil and non-ionic surfactants designed for use with a broad range of pesticides where a concentrated crop oil adjuvant is recommended. The addition of this product to the spray tank utilizes the penetrating, non- evaporating properties of a paraffinic crop oil and the wetting and dispersing characteristics of a surfactant blend. When used as directed,REGISTER® X-TREME® increases the activity of herbicides by aiding in the deposition, absorption and retention of active ingredients on leaf and stem surfaces. Therefore, care must be taken in treating crops during periods when plants are subjected to drought stress, high temperatures, and high humidity. NOT FOR AQUATIC USE IN WASHINGTON STATE.
Principal Functioning Agents: Petroleum Oil and Alcohol Ethoxylates... 100%
Directions For Use: Refer to PESTICIDE label for specific crop use and application rates. Generally, use 4 pints in 100 gallons of water.
Mixing Instructions: Generally, use 1–2 quarts in 100 gallons of water or 1–2 pints per acre as required by the pesticide label. For best mixing results, fill the spray tank half full, add pesticide components, and add REGISTER® X-TREME® last and provide good agitation until tank is full.
Compare
X-CELERANT® | AMS Replacement, Defoamer, Drift Retardent & Water Conditioner-image
PRODUCT NAME X-CELERANT® DESCRIPTION AMS Replacement, Defoamer, Drift Retardent, Water Conditioner PRINCIPAL FUNCTIONING AGENTS  Alkylpolyglycosides, Defoamers and Nonionic Coupling Agents: 20%  Blend of Ammonium Salts: 25.5%  FEATURES & BENEFITS X-CELERANT® will enhance the herbicide activity of certain post emergence herbicides when used at the proper rate. When used at recommended rates, X-CELERANT® can increase the performance of those herbicides recommended for use with ammonium-based nitrogen. X-CELERANT® Advantages: Consists of surfactants, defoamer, drift control agent and ammonium salts.  DIRECTIONS FOR USE Recommended Rates: 1 – 2 quarts per 100 gallons water.   PACKAGING:  2.5 Gallon Containers & 275 Gallon Totes DOCUMENTS Product Label SDS
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/CE X-Celerant SDS.pdf
Short Description: AMS Replacement, Defoamer, Drift Retardent, Water Conditioner
Packaging: 2.5 Gallon Cases & 275 Gallon Totes
Features & Benefits: X-CELERANT® will enhance the herbicide activity of certain post emergence herbicides when used at the proper rate. When used at recommended rates, X-CELERANT® can increase the performance of those herbicides recommended for use with ammonium-based nitrogen. X-CELERANT® Advantages: Consists of surfactants, defoamer, drift control agent and ammonium salts.
Principal Functioning Agents: Alkylpolyglycosides, Defoamers and Nonionic Coupling Agents: 20% Blend of Ammonium Salts: 25.5%
Directions For Use: Add X-CELERANT® to spray tank at the rate specified by the herbicide label and follow directions for use as to rates, timing, procedures and crop restrictions. Check compatibility of proposed spray mixture in a jar test before large scale mixing. It is recommended that a test area be used when conditions of high humidity or high temperature exist.
Mixing Instructions: 1 - 2 quarts per 100 gallons water.
Compare
SWIFTKICK® | Fungicide / Insecticide Activator Adjuvant-image
PRODUCT NAME SWIFTKICK® DESCRIPTION Fungicide / Insecticide Activator Adjuvant PRINCIPAL FUNCTIONING AGENTS  Proprietary blend of polysorbate fatty acids and polyethoxy esters: 99.5%  Dimethylpolysiloxane: 0.5%  FEATURES & BENEFITS SWIFTKICK® is a unique multi-purpose activator adjuvant that will enhance chemical activity with premium ingredients and proven performance. SWIFTKICK® is highly compatible and can be applied to all crops. SWIFTKICK® Advantages: Increases fungicide and insecticide performance, Accelerates droplet retention and coverage, Improves penetration and translocation, Maximizes the return on investment, Performance on a wide range of diseases and systemic fungicides, 99.5% proprietary blend of active ingredients  DIRECTIONS FOR USE Ground application: 1 pt of SwiftKick per 100 gals of spray solution  Aerial application: 1 qt of SwiftKick per 100 gals of spray solution  PACKAGING:  1 Gallon Containers DOCUMENTS Tech Sheet Product Label  
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/swift-kick-tech-sheet.png
Short Description: Fungicide Activator Adjuvant derived from urea and potassium acetate
Packaging: 1 gallon containers
Features & Benefits: SwiftKick is a unique multi-purpose activator adjuvant that will enhance chemical activity with premium ingredients and proven performance. SwiftKick is highly compatible and can be applied to all crops. It\\\\\\\'s low use rate makes it convenient. SwiftKick Advantages : • Increases fungicide and insecticide performance • Accelerates droplet retention and coverage
• Improves penetration and translocation
• Maximizes the return on investment • Performance on a wide range of diseases and systemic fungicides
• 99.5% proprietary blend of active ingredients
Principal Functioning Agents: Proprietary blend of polysorbate fatty acids and polyethoxy esters: 99.5% Dimethylpolysiloxane: 0.5%
Directions For Use: Ground application: 1 pt of SwiftKick per 100 gals of spray solution Aerial application: 1 qt of SwiftKick per 100 gals of spray solution
Compare
STRONGHOLD ® | Deposition Aid-image
PRODUCT NAME STRONGHOLD ® DESCRIPTION Deposition Aid PRINCIPAL FUNCTIONING AGENTS  Proprietary blend of ethoxylates, fatty acids and parafins: 99%  CROPS FEATURES & BENEFITS STRONGHOLD® is a proprietary adjuvant blend, designed to be used with pre-plant and pre-emergent herbicides to enhance coverage, deposition and improve absorption of spray mixture on the soil reducing the potential for leaching. Soil type will affect the degree of soil penetration. STRONGHOLD® may be used with herbicides and/or fertilizer mixtures. Benefits: Improves absorption, Improves pre-emergent weed control, Reduces evaporation, Superior drift control, Enhances efficiency, Reduces offsite movement (such as herbicide splash-up)  DIRECTIONS FOR USE Ground application:  Use 1 – 4 pints of STRONGHOLD per acre in 5 – 30 gallons of spray.   Aerial application:  Use 6 – 16 ounces of STRONGHOLD per acre.  A minimum of 1.0% by volume is recommended for aerial and low volume spray applications.   PACKAGING:  2.5 Gallon Containers DOCUMENTS Tech Sheet Product Label SDS  
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/StrongHold-846x1024.png
Short Description: Deposition Aid
Packaging: 2.5 Gallon Containers
Features & Benefits: STRONGHOLD is a proprietary adjuvant blend, designed to be used with pre-plant and pre-emergent herbicides to enhance coverage, deposition and improve absorption of spray mixture on the soil reducing the potential for leaching. Soil type will have an effect on the degree of soil penetration. STRONGHOLD may be used with herbicides and/or fertilizer mixtures. Benefits: • Improves absorption • Improves pre-emergent weed control • Reduces evaporation • Superior drift control • Enhances efficiency • Reduces offsite movement (such as herbicide splash-up)
Principal Functioning Agents: Proprietary blend of ethoxylates, fatty acids and parafins
Directions For Use: Ground application: Use 1 - 4 pints of STRONGHOLD per acre in 5 - 30 gallons of spray. Aerial application: Use 6 - 16 ounces of STRONGHOLD per acre. A minimum of 1.0% by volume is recommended for aerial and low volume spray applications.
Compare
NU-SURF X-TREME® | High Availability - Low Use - Low Rate Non-Ionic Surfactant-image
PRODUCT NAME NU-SURF X-TREME® DESCRIPTION Nonionic Surfactant PRINCIPAL FUNCTIONING AGENTS  Surfactants, humectants, and free fatty acids: 90%  Constituents Ineffective as a Spray Adjuvant: 10%  CROPS FEATURES & BENEFITS NU-SURF X-TREME is a premium grade, low foam non-ionic spray adjuvant for use on plants to maximize the effectiveness of insecticides, herbicides, fungicides and defoliants. It is designed for outstanding solublization in cold water, quick wetting, uniform droplet distribution and increased spray retention on leaf and stem surfaces. NU-SURF X-TREME incorporates superior wetting and penetrating characteristics that allow for more uniform spray coverage without excessive runoff of the spray.  DIRECTIONS FOR USE Applications Nu-Surf X-TREME Per 100 Gallons Mix Insecticides 3 to 8 ounces Fungicides 3 to 8 ounces Herbicides 1 to 4 pints Acaricides 3 to 8 ounces  Defoliants 1 to 2 pints Desiccants 1 to 2 pints Wettable Powders 1 to 2 pints   PACKAGING:  2.5 Gallon Containers DOCUMENTS Tech Sheet Product Label  
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/NU-SURF TDS-compressed.pdf
Packaging: 2.5 Gallon Containers
Features & Benefits: NU-SURF X-TREME is a premium grade, low foam non-ionic spray adjuvant for use on plants to maximize the effectiveness of insecticides, herbicides, fungicides and defoliants. It is designed for outstanding solublization in cold water, quick wetting, uniform droplet distribution and increased spray retention on leaf and stem surfaces. NU-SURF X-TREME incorporates superior wetting and penetrating characteristics that allow for more uniform spray coverage without excessive runoff of the spray.
Principal Functioning Agents: Surfactants, humectants, and free fatty acids: 90% Constituents Ineffective as a Spray Adjuvant: 10%
Directions For Use: Applications | Nu-Surf X-TREME Per 100 Gallons Mix Insecticides: 3 to 8 ounces Fungicides: 3 to 8 ounces Herbicides: 1 to 4 pints Acaricides: 3 to 8 ounces Defoliants: 1 to 2 pints Desiccants: 1 to 2 pints Wettable Powders: 1 to 2 pints
Mixing Instructions: Applications | Nu-Surf X-TREME Per 100 Gallons Mix Insecticides: 3 to 8 ounces Fungicides: 3 to 8 ounces Herbicides: 1 to 4 pints Acaricides: 3 to 8 ounces Defoliants: 1 to 2 pints Desiccants: 1 to 2 pints Wettable Powders: 1 to 2 pints
Compare
KINGTIDE® | Non-Ionic Wetter / Spreader / Penetrant-image
PRODUCT NAME KINGTIDE® DESCRIPTION NON-IONIC WETTER / SPREADER / PENETRANT PRINCIPAL FUNCTIONING AGENTS  Methyl soyate, Methylated silicones, and Polyethylene glycol mono (branched pnonylphenyl) ether: 100%  FEATURES & BENEFITS KINGTIDE® is a multifunctional spray adjuvant formulated to promote fast spreading, uniform distribution and absorption of pesticide mixtures on leaf and stem surfaces. KINGTIDE® is labeled for use with pesticides in agricultural cropping systems, aquatic, industrial, right-of-ways, non-cropland, forestry, and turf applications. Use KINGTIDE® wherever a label calls for an MSO or MVO and allows or does not exclude the use of an organosilicone.  DIRECTIONS FOR USE Herbicides: Use KINGTIDE® at ½ to 2 pints per acre in 10 to 20 gallons of spray solution for ground applications or ½ to 2 pints per acre in 5 to 10 gallons of spray solution for aerial applications. Insecticides / Fungicides / Defoliants: Use KINGTIDE® at 4 to 16 fluid ounces per acre in 5 to 10 gallons of spray solution for ground applications or 4 to 6 fluid ounces per acre in 2 to 5 gallons of spray solution for aerial applications.  PACKAGING:  2.5 Gallon Containers DOCUMENTS Tech Sheet Product Label  
Short Description: NON-IONIC WETTER / SPREADER / PENETRANT
Features & Benefits: KINGTIDE® is a multifunctional spray adjuvant formulated to promote fast spreading, uniform distribution and absorption of pesticide mixtures on leaf and stem surfaces. KINGTIDE® is labeled for use with pesticides in agricultural cropping systems, aquatic, industrial, right-of-ways, non-cropland, forestry, and turf applications. Use KINGTIDE® wherever a label calls for an MSO or MVO and allows or does not exclude the use of an organosilicone.
Principal Functioning Agents: Methyl soyate, Methylated silicones, and Polyethylene glycol mono (branched pnonylphenyl) ether
Directions For Use: Herbicides: Use KINGTIDE® at ½ to 2 pints per acre in 10 to 20 gallons of spray solution for ground applications or ½ to 2 pints per acre in 5 to 10 gallons of spray solution for aerial applications. Insecticides / Fungicides / Defoliants: Use KINGTIDE® at 4 to 16 fluid ounces per acre in 5 to 10 gallons of spray solution for ground applications or 4 to 6 fluid ounces per acre in 2 to 5 gallons of spray solution for aerial applications. Insecticides/Fungicides/Defoliants: Use KINGTIDE™ at 4 to 16 fluid ounces per acre in 5 to 10 gallons of spray solution for ground applications or 4 to 6 fluid ounces per acre in 2 to 5 gallons of spray solution for aerial applications.
Mixing Instructions: Always follow the pesticide label instructions for mixing and use. However, if no mixing instructions are available, add tank mix partners in the following order, maintaining agitation throughout: 1. Water to ¾ of target volume. 2. Fertilizers and micronutrients. 3. If foaming is anticipated, add SudBlaster X-TREME 4. Water soluble actives (dry flowables, granules, etc.). 5. Flowable and water soluble actives. 6. KINGTIDE™ 7. Water to desired target volume. For optimum results, spray mixtures containing KINGTIDE™ should be applied within 36 hours.
Compare
FUZE™ | Non-Ionic Wetter / Sticker / Penetrant-image
PRODUCT NAME FUZE™ DESCRIPTION Non-Ionic Wetter / Sticker / Penetrant / Rain Fastening Agent PRINCIPAL FUNCTIONING AGENTS  Alkylphenol ethoxylate, polyether-modified polysiloxane, and glycol blend: 100%  FEATURES & BENEFITS FUZE™ is a superior organosilicone surfactant developed for water-based herbicide applications in agriculture, horticulture industrial, turf and forestry operations. It is designed for quick spreading and wetting, uniform droplet distribution and absorption on leaf and stem surfaces. FUZE™ may be used with most pesticides and fertilizer products. FUZE™ is also recommended for use with non-selective herbicides and other pesticides including those used to desiccate or defoliate.  DIRECTIONS FOR USE FUZE™ is an organosilicone surfactant designed for use in those agricultural applications, where a nonionic surfactant is recommended. Rate: 1 – 4 pints per 100 gallons.  PACKAGING: 1 Gallon Containers DOCUMENTS Tech Sheet Product Label  
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/FUZE TDS-compressed.pdf
Short Description: FUZE is a superior organosilicone surfactant developed for water-based herbicide applications in agriculture, horticulture industrial, turf and forestry operations.
Packaging: 1 Gallon Containers
Features & Benefits: FUZE is a superior organosilicone surfactant developed for water-based herbicide applications in agriculture, horticulture industrial, turf and forestry operations. It is designed for quick spreading and wetting, uniform droplet distribution and absorption on leaf and stem surfaces. FUZE may be used with most pesticides and fertilizer products. FUZE is also recommended for use with non-selective herbicides and other pesticides including those used to desiccate or defoliate.
Principal Functioning Agents: Alkylphenol ethoxylate, polyether-modified polysiloxane, and glycol blend
Directions For Use: FUZE is an organosilicone surfactant designed for use in those agricultural applications, where a nonionic surfactant is recommended. Suggested Rates for use with various categories of chemicals are as follows: Chemical Group Pints of FUZE per 100 gallons of spray mixture Insecticides, Miticides & Fungicides 0.25 to 2 pints Herbicides 0.25 to 2 pints Glyphosate formulations without added surfactants 8 pints Defoliants & Desiccants 0.75 to 4 pints Fertilizers & Micronutrients 0.25 to 2 pints
Compare
CROPSMART X-TREME® | High Availability - Low Use - Low Rate - Refined Crop Oil Concentrate-image
PRODUCT NAME CROPSMART X-TREME® DESCRIPTION High Refined Crop Oil Concentrate PRINCIPAL FUNCTIONING AGENTS  Paraffin Base Petroleum Oil: 60% Surfactant Blend: 40%  CROPS FEATURES & BENEFITS CROPSMART X-TREME® is a highly concentrated non-ionic blend of highly refined paraffinic crop oil and surfactants designed to optimize the performance of certain herbicides in post emergence applications. This combination utilizes the penetrating, non-evaporating properties of a paraffinic crop oil and the wetting and dispersing characteristics of a surfactant blend at a lower use rate. The lower rate means less material to add, inventory, and ship to perform the same job. When used as directed, CROPSMART X-TREME® increases the activity of herbicides by aiding in the deposition, absorption and retention of active ingredients on leaf and stem surfaces. Therefore, care must be taken in treating crops during periods when plants are subjected to drought stress, high temperatures and high humidity.  DIRECTIONS FOR USE REFER TO PESTICIDE LABEL FOR SPECIFIC CROP USE AND APPLICATION RATES. Generally, use 4 pints in 100 gallons of water (0.5% V/V). Do not exceed 1.0% by volume of the spray solution. Always add CROP SMART X-TREME last to the spray mixture and provide good agitation. Prior to use, read and follow all directions on this label and on the label of the pesticide being used. The pesticide manufacturer’s label for specific usages and restrictions have precedence.  PACKAGING:  2.5 Gallon Containers DOCUMENTS Tech Sheet Product Label  
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/CROPSMART X merged-compressed new.pdf
Short Description: CROP SMART X-TREME is a highly concentrated non-ionic blend of highly refined paraffinic crop oil and surfactants designed to optimize the performance of certain herbicides in post emergence applications
Packaging: 2.5 Gallon Containers
Features & Benefits: CROP SMART X-TREME is a highly concentrated non-ionic blend of highly refined paraffini crop oil and surfactants designed to optimize the performance of certain herbicides in post emergence applications. This combination utilizes the penetrating, non-evaporating properties of a paraffinic crop oil and the wetting and dispersing characteristics of a surfactant blend at a lower use rate. The lower rate means less material to add, inventory, and ship to perform the same job. When used as directed, CROP SMART X-TREME increases the activity of herbicides by aiding in the deposition, absorption and retention of active ingredients on leaf and stem surfaces. Therefore, care must be taken in treating crops during periods when plants are subjected to drought stress, high temperatures and high humidity.
Principal Functioning Agents: Paraffin Base Petroleum Oil: 60% Surfactant Blend: 40%
Directions For Use: REFER TO PESTICIDE LABEL FOR SPECIFIC CROP USE AND APPLICATION RATES. Generally, use 4 pints in 100 gallons of water (0.5% V/V). Do not exceed 1.0% by volume of the spray solution. Always add CROP SMART X-TREME last to the spray mixture and provide good agitation. Prior to use, read and follow all directions on this label and on the label of the pesticide being used. The pesticide manufacturer's label for specific usages and restrictions have precedence.
Compare
CONQUER™ | Modified Vegetable Oil and Surfactant-image
PRODUCT NAME CONQUER™ DESCRIPTION Modified Vegetable (Seed) Oil and Surfactant  PRINCIPAL FUNCTIONING AGENTS  Modified Vegetable (Seed) Oil and Alkyl Phenol Ethoxylate: 100%  CROPS FEATURES & BENEFITS CONQUER is a multifunctional spray adjuvant developed as a penetrating surfactant concentrate with superior wetting and penetrating characteristics. CONQUER is designed as a replacement for non-ionic surfactants and crop oil concentrates in liquid spray mixtures. When used as directed, CONQUER maximizes the activity and effectiveness of certain herbicides in post emergence applications. Therefore, care must be taken in treating sensitive crops during periods when plants are subjected to drought stress, high temperatures, and high humidity.  DIRECTIONS FOR USE Use CONQUER at the rate of 1-2 pint/acre as a replacement for non-ionic surfactants and crop oil concentrates. The high end of the recommended use rate may be necessary during periods when plants are subjected to extreme stress or weed populations. The addition of a liquid fertilizer (28-32% nitrogen solution) may also be required to improve control under extreme environmental conditions. Always add CONQUER last to the spray mixture and provide good agitation.  PACKAGING:  2.5 Gallon Containers DOCUMENTS Quick Reference Guide Tech Sheet Product Label SDS
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/CONQUER TDS-compressed.pdf
Short Description: CONQUER™ Modified Vegetable (Seed) Oil and Surfactant
Packaging: 2.5 Gallon Containers
Features & Benefits: CONQUER is a multifunctional spray adjuvant developed as a penetrating surfactant concentrate with superior wetting and penetrating characteristics. CONQUER is designed as a replacement for non-ionic surfactants and crop oil concentrates in liquid spray mixtures. When used as directed, CONQUER maximizes the activity and effectiveness of certain herbicides in post emergence applications. Therefore, care must be taken in treating sensitive crops during periods when plants are subjected to drought stress, high temperatures, and high humidity.
Principal Functioning Agents: Modified Vegetable (Seed) Oil and Alkyl Phenol Ethoxylate
Directions For Use: Use CONQUER at the rate of 1-2 pint/acre as a replacement for non-ionic surfactants and crop oil concentrates. The high end of the recommended use rate may be necessary during periods when plants are subjected to extreme stress or weed populations. The addition of a liquid fertilizer (28-32% nitrogen solution) may also be required to improve control under extreme environmental conditions. Always add CONQUER last to the spray mixture and provide good agitation.
Compare
CASTNET® | NON-AMS Water Conditioner, Surfactant & Drift Retardent-image
PRODUCT NAME CASTNET® DESCRIPTION NON-AMS Water Conditioner, Surfactant & Drift Retardent  PRINCIPAL FUNCTIONING AGENTS  •    1,2,3 – Propanetricarboxylic acid, 2-hydroxy-, trisodium salt, dehydrated, D-Glucopyranose, oligomeric, decyloctyl glycosides, and Monocarbamide dihydrogen sulfate: 34.75% •    Constituents ineffective as a Spray Adjuvant: 65.25% FEATURES & BENEFITS CASTNET is a water-conditioning agent/surfactant/drift reduction agent with defamer, that is formulated to enhance pesticidal performance.  CASTNET contains buffering and chelating agents which aid in maintaining the right pH in the tank mix solution and block hard water cations from interacting with the pesticide molecule.  CASTNET contains a non-ionic surfactant to improve retention and wetting of pesticides.  CASTNET contains no ammonium sulfate (AMS).   DIRECTIONS FOR USE •    Add 1 – 4 quarts of CASTNET per 100 gallons of spray water (0.5 – 1%v/v) when used in place of ammonium sulfate.   •    For general use as a drift reduction agent, use 1 – 3 quarts of CASTNET per 100 gallons of spray water (0.25 – 0.75% v/v).   PACKAGING: Available in 2.5-gallon containers & 275 Gallon Totes DOCUMENTS Tech Sheet Product Label
Tech Sheet: http://cropexcellence.com/wp-content/uploads/upcp-product-file-uploads/CastNetTechSheet6.20-min-1.png
Packaging: 2.5 Gallon Containers
Features & Benefits: CASTNET is a water-conditioning agent/surfactant/drift reduction agent with defamer, that is formulated to enhance pesticidal performance. CASTNET contains buffering and chelating agents which aid in maintaining the right pH in the tank mix solution and block hard water cations from interacting with the pesticide molecule. CASTNET contains a non-ionic surfactant to improve retention and wetting of pesticides. CASTNET contains no ammonium sulfate (AMS).
Principal Functioning Agents: 1,2,3 - Propanetricarboxylic acid, 2-hydroxy-, trisodium salt, dehydrated, D-Glucopyranose, oligomeric, decyloctyl glycosides, and Monocarbamide dihydrogen sulfate: 34.75% • Constituents ineffective as a Spray Adjuvant: 65.25%
Directions For Use: • Add 1 - 4 quarts of CASTNET per 100 gallons of spray water (0.5 - 1%v/v) when used in place of ammonium sulfate. • For general use as a drift reduction agent, use 1 - 3 quarts of CASTNET per 100 gallons of spray water (0.25 - 0.75% v/v).